Mid-range
Speaker Installation
Mid-range Speaker
Mounting Ring Concept
- HD-4 which is part of the CDT Audio HD-624 3-way system
Mounting Ring Concept
- CDT Audio 3-way system Mid Range is 4" speaker does not
fit in available space behind the panel.
- Two plywood rings are used to provide minimize visual effect of required speaker elevation:
- some speakers may have small enough magnet that this is not required,
- if not, 1/4 elevation usually should be sufficient,
- mounting speaker grill rind directly on the top of 1'4 wooden ring results excessive protrusion,
- use of the second ring, masks the speaker grill ring and allows to greater outside diameter , which minimizes the effect of elevation,
- Speaker grill ring must be inserted into the plywood outer ring
from the inside (cutout wall must be tampered to angle close to ring's
angle):
